Monday, January 13, 2014

Adeptus Mechanicus Display Board

I've recently taken on a commission to fabricate an army board reminiscent of an air strip for an army of Adeptus Mechanicus. The client had the idea of the hanger bays from the reboot of Battlestar Galactica.  Since there's to be upwards of 80 bases, several large including two flying bases, he asked for a 24"x36" board. I suggested going with all wood substrate and details in styrene. After a rough layout was drawn, the client, Ben, set out his models to confirm the space then it was off to the hardware store and hobby shops to get the materials.

I went with 3/4" x 1 1/4" got the frame and 1/4" thick fiberboard for the surface. For the bay housing and observation deck I used 3/8" thick fiber board. Now, I don't have a scroll saw so I use a tile knife to cut the shapes needed.

The main board was screwed to the frame and wood filler used to cover the screws and add a somewhat smoother surface to the frame.

The diamond plate, set in a 1:48th scale, was added the whole of it was primed in a Fenrisian Grey mixed with a bit of black.

The AM logo was free hand with a graphite transfer as a guide. The caution stripes were achieved with a bit of masking.

Here are some close-ups of the initial weathering:

UPDATE: Landing Lights and Thruster Burns.

No comments:

Post a Comment